Acoustic radiation force on a sphere in standing and quasi-standing zero-order Bessel beam tweezers

Starting from the exact acoustic scattering from a sphere immersed in an ideal fluid and centered along the propagation axis of a standing or quasi-standing zero-order Bessel beam, explicit partial-wave representations for the radiation force are derived. A standing or a quasi-standing acoustic field is the result of propagating two equal or unequal amplitude zero-order Bessel beams, respectively, along the same axis but in opposite sense. The Bessel beam is characterized by the half-cone angle β of its plane wave components, such that β = 0 represents a plane wave. It is assumed here that the half-cone angle β for each of the counter-propagating acoustic Bessel beams is equal. Fluid, elastic and viscoelastic spheres immersed in water are treated as examples. Results indicate the capability of manipulating spherical targets based on their mechanical and acoustical properties. This condition provides an impetus for further designing acoustic tweezers operating with standing or quasi-standing Bessel acoustic waves. Potential applications include particle manipulation in micro-fluidic lab-on-chips as well as in reduced gravity environments.     

Using a virtual skeleton to increase printability of topology optimized design for industry-class applications

This article broadens the scheme previously developed to associate topology optimization with additive manufacturing through the use of a virtual skeleton, consisting in solving the same physical problem with a discrete approach and then with a continuum one. This procedure for 3D designs is applied to various domain geometries, to demonstrate its pertinence on high-resolution industrial cases. An algorithm searching for the best printing direction, exploring the solid angle, is also described and validated; the surface-shaped presentation of the result allows immediate understanding of the influence of the discrete problem parameters, while its running time is much lower than a unique continuum optimization simulation, which proves the attractiveness of the method. In the three examples studied, the procedure outputs exhibit greater printability than the ones produced by traditional methods in each of the printing direction tested, albeit responsibility is left to the final user to choose his best trade-off. Furthermore, the unprintable zones are readily displayed to be either reworked or supported. Explanations about increase of convergence likelihood on discrete structures despite the geometry complexity of an industrial application are also provided and demonstrated.     

基于分子描述符和机器学习方法预测和虚拟筛选乳腺癌靶向蛋白HEC1抑制剂

HEC1(癌症高表达蛋白)是纺锤体检查点控制、着丝粒功能、细胞存活的关键的有丝分裂调节器,与原发性乳腺癌的不良预后有关.筛选具有高亲和力的HEC1新型抑制剂对探索乳腺癌的靶向治疗具有重要意义.本文从结构多样性的化合物库中筛选HEC1抑制剂.通过对分子描述符的特征筛选,采用支持向量机(SVM)和随机森林(RF)方法分别对HEC1抑制剂和非抑制剂建立了分类模型.经对比, RF模型显示了更好的预测精度.我们采用RF模型对HEC1抑制剂进行了虚拟筛选,从“in-house”实体库筛选得到2个潜在的HEC1抑制剂分子.随后对筛出的化合物进行了体外活性实验,发现对乳腺癌细胞株MDA-MB-468和MDA-MB-231均有一定程度的抗肿瘤活性.研究结果表明,机器学习方法对于设计和虚拟筛选HEC1抑制剂有良好的效果.     

具有全新机理的DNA旋转酶抑制剂的筛选及抑菌活性

利用具有新机制的抗耐药菌DNA旋转酶抑制剂GSK299423与DNA旋转酶的晶体复合物(PDB code:2XCS)构建基于配体-受体复合物的药效团模型, 诱骗集(Decoy set)验证结果表明该药效团模型具有较强的活性识别能力. 将药效团模型与分子对接相结合用于筛选化合物库, 通过抑菌活性测定, 获得了具有抗多药耐药菌活性的DNA旋转酶抑制剂LTH02.     

Fractional visco-elastic Euler–Bernoulli beam

Aim of this paper is the response evaluation of fractional visco-elastic Euler–Bernoulli beam under quasi-static and dynamic loads. Starting from the local fractional visco-elastic relationship between axial stress and axial strain, it is shown that bending moment, curvature, shear, and the gradient of curvature involve fractional operators. Solution of particular example problems are studied in detail providing a correct position of mechanical boundary conditions. Moreover, it is shown that, for homogeneous beam both correspondence principles also hold in the case of Euler–Bernoulli beam with fractional constitutive law. Virtual work principle is also derived and applied to some case studies.     

A Simple Closed-Loop Active Control of Electrodynamic Shakers by Acceleration Power Spectral Density for Environmental Vibration Tests

This work presents the main results of a simple closed-loop active control for an electrodynamic shaker in order to generate acceleration Power Spectral Densities (PSD) according to prescribed Standards used in environmental vibration tests. The main idea is to start generating acceleration pseudo-signals obeying the prescribed Power Spectral Density and then to acquire acceleration data from the electrodynamic shaker’s table behaviour. So the Power Spectral Density of the acquired acceleration is computed and compared with the required PSD and then the time-varying pseudo-acceleration is updated to reflect this corrected PSD. It was noticed that for piecewise narrow bands frequencies, the electrodynamic shaker acceleration behaves near linearly, both in frequency and voltage, for the input signals. A code in AgilentVee 7.5 software to acquire, send and process signals for the active control in a closed-loop scheme was developed. The used A/D D/A hardware was a single PC sound card with specific characteristics. The control could be accomplished sending and acquiring at the same time with a range of input/output of ±1.5 V with 16 bits of resolution, at 48 kHz and assistance of an external sound amplifier.     

对碎裂结构岩体似连续介质特征的一点研究

通常情况下认为碎裂结构的岩体具有非连续介质的特征。但是随着西部大量水电工程的勘查和建设,遇到了一类比较特殊的岩体,这类岩体中裂隙发育,结构面间距很小,按照国标划分为碎裂结构岩体,但是其本身又具有较高的力学性质,表现为具有较高的变形模量、抗剪强度参数和完整性系数,并且具有似连续介质的特征,这与通常的碎裂结构岩体有本质的区别。本文将利用两个实例工程对这一现象进行初步的分析,得到了水电工程可利用岩体的一种新的评价方法。     

基于虚拟仪器的导弹质心定位系统设计与实现

针对传统导弹质心定位设备精度低,操作繁琐等弊端,从弹体质心定位原理出发,合理选取力矩计算参考点,建立质心定位模型;以基于PCI总线的内插式DAQ虚拟仪器测控平台为依托,突出“通用性、精确性、高效性”的设计理念,制定系统总体设计方案,围绕导弹质量测量与质心定位技术展开研究与工程实现;实际应用表明,本系统可拓展应用于多型导弹和大型圆柱形工件的称重与质心定位,满足导弹飞行控制研究和装配工艺要求。     

基于LabVIEW Vision的无人机自主着降系统设计与实现

四旋翼无人机具有低成本、垂直起降、机动性好等优点,在民用领域诸如航拍、植保、物流、电力巡线等场合得到了广泛的关注和应用。随着四旋翼无人机应用的普及,一些新的问题也随之出现,其中一个厄待解决的问题是如何提高无人机的降落精度和可靠性,特别在超视距应用场景下,这一需求尤为突出。通过采用机器视觉技术,利用LabVIEW Vision编制视觉识别软件,可以控制四旋翼无人机实现高精度的自主降落。